欧洲无码精品A区|91伊人成人在线|亚洲性爱偷拍自拍|91富婆找鸭精品|玖玖资源亚洲免费|久热精品激情精品|久久国产精品久久久|大胆美女高潮无码|日本黄色视频1024免费看|最新超碰在线精品

1. The meter should be energized for 15 minutes before use.

2. Avoid vibration and shock. Do not use in places with excessive dust and harmful gas.

3. The input wire shall not be too long. If the input end of the measured signal is longer, please try the double-stranded shield wire.

4. If the signal is accompanied by high-frequency interference, the low-frequency filter should be tested online.

5. Please have electricity for no less than 4 hours every three months for long time storage.

6. Screw the current terminals in the CT loop must be tightened to ensure the inlet/outlet contact is reliable, so as to avoid failure.

7. If the instrument is to be calibrated, the calibration instrument should be better than 0.1 level to ensure the accuracy.

6, long-term preservation should avoid direct light, should be stored in a temperature - 25 ° C ~ 55 ° C.

8. If the meter is not displayed, check the auxiliary power supply first and see if the voltage is within the range.

9. If the display is abnormal, check whether the input signal is normal and whether the signal terminals are tightened.

10. Unless PT has sufficient power, PT signal cannot be used as auxiliary power to ensure the instrument to work normally.